Kmode Exception Not Handled
Hello everyone in this article, I will guide you on how to resolve the Windows 10 blue screen error of KMode Exception Not Handled. So this should hopefully be helpful for you guys, and without further ado, let’s go ahead and jump right in.
How to Fix KMode Exception Not Handled
Kmode_exception_not_handled is a Blue Screen of Death error on Windows 10, and this error can be caused by several things, ranging from bad drivers to installed software.
This error comes in all sorts of different forms, and it can be somewhat troublesome, but fortunately, there’s a solution available.
Since kmode_exception_not_handled is a BSOD error, it will make your computer restart each time you encounter it.
In some cases, you might not be able to access Windows 10 at all due to this error. Therefore you’ll have to fix this problem from Safe Mode.
Windows 10 BSOD kmode_exception_not_handled bug check value 0x0000001E occurs when the exception produced by a kernel-mode program isn’t handled well by an error handler. When this error occurs, the system crashes & gets to the point where it can no longer operate in normal mode, turning the entire screen to blue with several lines of error code Like.
Example: Your PC ran into a problem and needs to restart. We’re just collecting error info, And then we’ll restart for you. ( 65 % Completed )
Step 1:
Enter Recovery Options Method 1:
We’re going to start by actually getting into safe mode. If you’re unable to boot into the Windows, you need to do a hard power all three times in a row. It meaning turn on your computer until the point it gets to the Windows boot screen with a little loading circle. And then press the power button on your tower or laptop and then shut that off. After that, repeat that cycle two more times, so a total of three times. Turn on into the Recovery Options otherwise, when you were able to boot into Windows.
Enter Recovery Options Method 2:
You want to select the Start menu to select the power button right there on the screen that’s different than your actual physical Hardware button on your computer; they used to turn on and off your computer.
And now, you want to hold down the shift key on your keyboard while left-clicking on the Restart, so again hold down the shift key and then left-click on Restart.
Step 2:
Change Startup Behaviour:
You need to choose an option slot “troubleshoot reset your PC” or see “advanced options” select “advanced options” again. And now, select “startup settings“> “change Windows startup behavior” and then choose Restart.
Step 3:
safe mode with networking:
Now you want to tap the function here corresponds to enable “safe mode with networking,” which in my case is the F5 or Function 5 key on the modern keyboard. So I’m going to go tap that one time give it a moment to load.
Step 4:
MS Config:
So once you’re in safe mode here, you want to go and open up the Start menu. Now go ahead and left on the start ball one time and into the Start menu search, you want to type in MS config precisely as it appears best match should come back with “system configuration.”
Now you want to go ahead and left-click on that select the services tab, and then you want to look for some ways this “ELAN” service. ELAN service should be on this list under E.
Search for ELAN and then service you want to uncheck it and then select apply and ok to save the change.
After that, you’re going to go ahead and restart your computer that should get you to the regular Windows desktop, and hopefully, your issue will resolve.
Issues addressed in this method:
- kmode_exception_not_handled windows 10
- kmode_exception_not_handled windows 8
- kmode_exception_not_handled windows 8.1
- kmode_exception_not_handled intelppm.sys
- kmode_exception_not_handled fwpkclnt.sys windows 10
- kmode_exception_not_handled intelppm.sys server 2012
- kmode_exception_not_handled intelppm.sys server 2012 r2
- kmode_exception_not_handled error
- kmode_exception_not_handled (aksdf.sys) windows server 2012
- kmode_exception_not_handled ataport.sys
- kmode_exception_not_handled atikmdag.sys
- kmode_exception_not_handled blue screen
- blue screen kmode_exception_not_handled windows 10
Supported Devices:
This fix will apply for computers, laptops, desktops, and tablets running the Windows 10 operating system (Home, Professional, Enterprise, Education) from all supported hardware manufactures, like Dell, HP, Acer, Asus, Toshiba, Lenovo, and Samsung).
Method 2: Run Windows Memory Diagnostics:
Windows Memory Diagnostic is the system memory(RAM) test. It can help check the system’s RAM for issues. During the test process, there’ll be a status bar showing you if any problems have been detected. Also, Windows Memory Diagnostics can check the kmode exception not handled the error.
- Open Windows memory diagnostics via searching from the search box of Windows 10;
- Now Click on the Restart Now and check for problems (recommend).
Supported Devices:
This fix will apply for computers, laptops, desktops, and tablets running the Windows 10 operating system (Home, Professional, Enterprise, Education) from all supported hardware manufactures, like Dell, HP, Acer, Asus, Toshiba, Lenovo, and Samsung).
Leave a Reply